Everbuild 708 Febflor Universal Self-Levelling Compound is a cement-based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. The compound provides a free-flowing mix that sets in 2-4 hours and can be overlaid after only 8 hours at normal temperatures.
Price Includes VAT
Everbuild 708 Febflor Universal Self-Levelling Compound
- Suitable for interior use
- Fast-setting – sets in 2 hours
- Up to 6mm in depth in one coat
- Used to level out uneven floors
- Enhanced flow properties coupled with long open time gives easy trowelling
- Can be overlaid after only 8 hours
Available in 20kg bags
Coverage: Covers approximately 4m² at 3mm (standard) depending on porosity of the substrate
Tested to EN13813 Class CT – C30 – F7
Sand/Cement Screed Allow at least four weeks of drying before application.
Dampen floors and prime with
Everbuild 501 PVA Bond diluted 1:3 with water. Mix with water as detailed below.
For surfaces to be subjected to heavy foot traffic, use Everbuild 709 Febflor Latex Plus rather than water when mixing the powder.
Timber Floors/Existing Tiling/Asphalt
De-grease and roughen up any glaze on existing tiling or asphalt prior to laying this product. Suitable for small areas (1 m² max) over interior timber floors only. Timber floors must be securely screwed down at 300 mm centres.
In all cases, apply Everbuild 503 SBR Bond to the floor at a 1:1 dilution with water. Mix Everbuild 708 Self Level Floor Compound with neat 709 Febflor Latex Plus (20 kg of powder to 5-litre of liquid) and apply to sub-floor whilst the bonding coat is still tacky.
Existing Vinyl Tiles
Ensure the tiles are clean and sound. Prime with Everbuild 503 SBR Bond diluted 1:1 with water, and apply floor level compound mixed with 709 Febflor Latex Plus over tiles whilst primer coat is still tacky. Allow 24 hours before applying final covering.
Application
- Prepare the floor by removing any loose particles and dust,
- Add the powder to water a bit at a time whilst stirring until a free-flowing creamy compound is produced.
- Pour the mixture out into the prepared floor and allow it to find its own level. Trowel down lightly to achieve an overall thickness not exceeding 6 mm.
- Where further finishing is required, allow the surface to stiffen, usually ¾ to one hour after application, and lightly sprinkle with water and carefully trowel to produce a smooth appearance. Do not sprinkle excessive water or over trowel at this stage.
- Additional layers, each not exceeding 6 mm, may be applied to achieve the required depth. Prime with Everbuild® 501 PVA Bond diluted 1:3 with water between layers.
Not suitable for use with underfloor heating.
For more information please see the datasheet below
Everbuild 708 Febflor Universal Self-Levelling Compound Datasheet
