DUE TO CURRENT WEATHER CONDITIONS - SOME COURIERS ARE RUNNING DELAYED SERVICES
Price Includes VAT
Orders & Enquiries: Call 01977 876116
The Everbuild Aquaseal Wet Room System Tanking Kit gives you everything you need to waterproof both walls and floors prior to tiling showers, wet rooms, wet zones and other areas susceptible to water and excessive moisture.
Ideal for use on plasterboard, MDF, plywood, cementitious boards, blockwork, concrete and specialist wet room boards.
Both kit sizes come complete with:
• 1-litre Aquaseal Waterproof Tanking Primer – For use before applyingTanking Membrane & Tanking Tape.
• Aquaseal Waterproof Tanking Membrane – Forms a permanentlyflexible watertight membrane, applied by brush, two coats.
• Aquaseal Waterproof Tanking Tape – Self-adhesive joint and cornersealing tape. Easy to apply with pre-cut release liner.
• Aquaseal Waterproof Tanking Drain Mat – Self-adhesive butylbacked fleece, capable of coping with movement around thedrain outlet.
• Aquaseal Wet Room System User Leaflet.
The Everbuild Aquaseal Wet Room System is designed to provide a permanently flexible watertight membrane prior to tiling in areas such as showers, wet rooms, wet zones in bathrooms and other tiled areas subject to water exposure such as balconies and partially covered external areas
STEP 1 – WATERPROOF TANKING PRIMER A ready to use primer, applied by brush to all porous and semi-porous surfaces in the areas that are to be waterproofed. It is quick-drying and can be over
STEP 2 – WATERPROOF TANKING TAPE A self-adhesive joint & corner sealing butyl backed fleece tape that should be applied to all corner joints, board joints and pipe penetrations to provide a watertight seal that accommodates cross-directional movement. The kit contains a 10 (5 for standard shower kit) metre roll which is usually sufficient to waterproof the corners in a 7.5 square metre application.
STEP 3 – WATERPROOF DRAIN MAT Self-adhesive butyl backed fleece capable of coping with board movement around the drain outlet, which is the area most susceptible to water leaks.
STEP 4 – WATERPROOF TANKING MEMBRANE A ready to use, liquid waterproofing compound which is applied in a 2 coat system by brush to provide a permanently flexible watertight membrane. Non-hazardous and solvent-free. It is quick-drying and tiling can commence after 12 hours.
Do not use on timber treated with spirit or stearate based coatings
Do not use in areas subject to high temperatures
It is the user's responsibility to determine suitability for use.
If in doubt view the Everbuild Aquaseal Wet Room datasheets below