Everbuild Black Jack Flashing DIY With Primer
Everbuild
SKU: 102479
Everbuild Black Jack Self Adhesive Flashing Tape (DIY) with the natural lead-look finish.
Each roll contains a 250ml tin of primer.
Price Includes VAT
Everbuild Black Jack Flashing DIY
- Replaces need for lead flashing
- Self-adhesive - requires no separate glue
Available in 3m x 100mm, 150mm & 225mm.
Each roll contains a 250ml tin of primer.
Everbuild Black Jack Flashing DIY is a strong self-adhesive flashing tape comprising of aluminium foil and a bitumen rubber adhesive. The adhesive forms a strong waterproof seal simply by pressing the tape into place by hand.
Uses For Everbuild Black Jack Flashing DIY
- General repair to existing flashing
- Flashing bituminous felt and similar roofs
- Flashing parapet walls
- Replacement of lost lead flashing
- Repairs to cracks in concrete
- Repairs to lead gutters
- Sealing capping bolts in roof sheets
- Sealing roof ridges
- Protective coating to insulation materials
- Sealing projections through roofs and similar sections
- Flashing between timber and brickwork or blockwork or blockwork cavities Flashing of skylights
How To Use The Everbuild Black Jack Flashing DIY
- Clean and dry, sound and free from oil, grease and dust. Remove all loose material by scraper or wire brush.
- Cut to the required length.
- Peel back approximately 5cm of release back cover and place the tape into position.
- Continue removing the release back cover whilst firmly placing the tape to avoid unnecessary creasing.
- Ensure intimate contact and that no air is trapped. Using a small roller ensure that all edges and overlaps are sealed properly.
- Overlaps should be at least 25mm.