Everbuild Black Jack Flashing Trade

• Replaces need for lead flashing
• Self-adhesive – requires no separate glue
• Suitable for most flashing applications
• Suitable for general repair to existing flashing
• Suitable for repairing lead gutters, cracks in concrete and replacing lost lead flashing

Available in 10m x 75mm, 100mm, 150mm, 225mm, 300mm & 450mm

Also, Avilable 3m Black Jack Flashing Tape with Flashing Primer

Uses For Everbuild Black Jack Flashing DIY

• General repair to existing flashing
• Flashing bituminous felt and similar roofs
• Flashing parapet walls
• Replacement of lost lead flashing
• Repairs to cracks in concrete
• Repairs to lead gutters
• Sealing capping bolts in roof sheets
• Sealing roof ridges
• Protective coating to insulation materials
• Sealing projections through roofs and similar sections
• Flashing between timber and brickwork or blockwork or blockwork cavities Flashing of skylights

How To Use The Everbuild Black Jack Flashing DIY

1. Clean and dry, sound and free from oil, grease and dust. Remove all loose material by scraper or wire brush.
2. Cut to the required length.
3. Peel back approximately 5cm of release back cover and place the tape into position.
4. Continue removing the release back cover whilst firmly placing the tape to avoid unnecessary creasing.
5. Ensure intimate contact and that no air is trapped. Using a small roller ensure that all edges and overlaps are sealed properly.
6. Overlaps should be at least 25mm.