Coo-Var Anti Slip Step & Ramp Paint

Coo-Var SKU: 100486
Coo-Var Anti Slip Step & Ramp Paint - HomeFix

Coo-Var Anti Slip Step & Ramp Paint

Coo-Var SKU: 100486
Colour
£11.75(inc VAT) Regular price £17.99(inc VAT) Sale price
(inc VAT) /

Pre-Order Item – Up to 10 Working Days

Coo-Var Anti-Slip Step & Ramp Paint is used to provide a durable and hard-wearing surface with an anti-slip finish. 

Price Includes VAT

Coo-Var Anti Slip Step & Ramp Paint

 

  • 2 Hour drying time
  • Matt finish
  • Estimated coverage: 5-9 m2
  • Has a recoat interval of  6 hours

Available in 1-litre tins

Coo-Var Anti-Slip Step & Ramp Paint can be used on concrete, wood, tarmac, stone, brickwork and suitably prepared metal. This product has been independently tested and has a PTV rating of 68 in dry conditions and 58 in wet. UK law recommends a minimum Pendulum Test Value on floors of 36 dry, wet or contaminated.

Suitable for indoor and outdoor use. Low odour & fast drying, hard-wearing, water-based and low slip risk in dry and wet conditions

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically, using Coo-Var Acid Etch.

These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with a suitable primer for that substrate. Existing painted surfaces.

Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying. Do not paint when the temperature will be at or below 7 °C during the painting and drying process.

Preceding Coat

Apply direct to wood, Coo-Var All Metals Primer on Metal, Coo-Var Anti-Slip Step & Ramp Paint thinned 5% with clean water on all other unpainted surfaces.

Limitations

Do not paint when the temperature will be at or below 7 °C during the painting and drying process.

Coo-Var Anti Slip Step & Ramp Paint Datasheet

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.