Triton Platon Aqua Channel Corner Piece Rodding Eye
The Aqua Channel Corner Piece is used to join lengths of Aqua Channel conduit at 90° corners.
The design of the Corner Pieces allow them to connect directly onto the Aqua Channel without the need for duct tapes etc.
It is recommended that one Rodding Eye (cleaning port/jetting eye) should be incorporated into the Aqua Channel for every 10 and 12 linear metre run of conduit installed. They can be inserted at any point along its length and allow for periodic cleaning of the drainage system.
Triton Aqua Channel is a PVC drainage conduit designed to control water ingress in below ground situations. It is fitted around the perimeter of the floor at the vulnerable wall/floor junction and is particularly suited for use in conjunction with Isola Platon cavity drain membranes. Water entering the building through the walls is controlled behind the Platon membrane, and diverted down to the Aqua Channel at the base of the wall. The water enters the Aqua Channel through pre-drilled drainage holes and must then be diverted to a suitable drainage point, either natural, or a sump and mechanical pump. As a general rule a minimum of one sump/discharge point is required for every 50 linear metre run of Triton Aqua Channel.