Everbuild Wood Preserver is an ideal timber treatment for long-lasting protection which can be overpainted, varnished or stained.

Price Included VAT

Long-lasting Protection Everbuild Wood Preserver

• Effectively stops rot, decay and wood boring insects
• Solvent-free formula
• Suitable for internal and external use
• Non-flammable
• Can be applied to damp timbers
• Available in a wide variety of colours for different woods

Available in 1litre, 5litre & 25litre 

Colours available are Clear, Fir Green, Dark Oak, Golden Chestnut, Red Cedar, Silver Birch & Slate Grey.

Ideal for general use on rough sawn or planed timber such as window frames, fences, sheds, cladding, horticultural timber, roof timber, joists etc. Fir Green is particularly useful for easy identification of treated timbers and horticultural work.

How to use the Everbuild Lumberjack wood preserver

1. Shake well before use.
2. Brush on using a paintbrush, spray or dipping.
3. Apply a minimum of two coats if brushing or spraying. The second coat should be applied after the first coat has soaked in but before it has dried.
4. Where possible thoroughly soak the end grain, for maximum protection dip the end grains of the timber for a minimum of 3 minutes.

Using the Everbuild Lumberjack Wood Preserver

Use on interior or exterior rough-sawn or planed timber such as floorboards, joists, roof timbers, window frames and doors.

This product is an ideal pre-treatment which may be overpainted, varnished, or stained when dry (allow 48 hours drying time).

For interior applications it may also be left as the final finish for a natural wood effect; however, when used externally, overpainting/staining is required, as this product does not repel water. Everbuild Shed & Fence Mate is ideal for this.

Please note product is milky out of the can but dries clear.