Everbuild Stain Block quick-drying easy to apply to walls and ceiling that permanently prevents existing stains from showing through subsequent coatings such as watermarks, mould, rust, nicotine, grease, soot and crayon.

Easy To Use Everbuild Stain Block Spray

• Stops stains such as watermarks, stains, rust, nicotine, grease, soot, pen marks and crayon showing through subsequent coatings
• Ideal for areas that have been affected by damp, mould, nicotine and grease
• Drying time 15 minute
• Easy to apply

Available in 400ml

How to use the Everbuild Stain Block Spray

Before using the stain block primer/paint ensure any stain from a water leak is completely dry. Any mould growth has been washed with a Fungicidal Wash and allow to dry. Remove rust and soot with a wire brush, wash down areas and allow to dry.

1. Shake the spray can until a rattling noise is heard then shake for a further 1-2 minutes to mix the paint.
   
2. Spray 20-30cm away from the wall or ceiling.
3. Spray over the stain until it is completely covered.
4. Allow the stain block to dry for 15 minutes before covering.

If the area is to be overcoated with a solvent-based paint, first apply a water-based primer.

Use the Everbuild stain block on walls and ceilings that have been affected by damp, mould, nicotine or grease.