Teamac Chlorinated Rubber Paint

Coo-Var
£89.99
Unit price per

SKU:100493

Colour
Quantity

Teamac liquid rubber paint white, blue & black provides outstanding protection against chemicals, acids and aqueous solutions on metal, wood and asbestos.

Price Includes VAT

Teamac Chlorinated Rubber Paint

  • A highly water-resistant paint for use in pools, parlours and anywhere water resistance is unimportant
  • The Coo-Var Chlorinated Rubber Swimming Pool Paint has a Gloss finish
  • White Chlorinated Rubber
  • One of the best ways to ensure chemical and water resistance
  • Gives outstanding protection

Available in Blue, Black and white 5 Litre 

SUITABLE SURFACES: METAL, WOOD, CONCRETE, BRICK, PLASTER

Offers outstanding protection against a range of chemicals and aqueous solutions. Can be used in a swimming pool below and above the waterline.

Ideal for swimming pools, paddling pools, fountain pools, ponds etc

  • Ideal for swimming pools
  • Acid-resistant
  • Chemical resistant
  • Salt water-resistant
  • Interior or exterior

One of the reasons why it is such a versatile rubber paint is that it is resistant to saltwater, and a wide range of chemicals and acids. Often used as a gloss finish, Chlorvar Chlorinated Rubber Paint will give protection in moderate to severe corrosive atmospheres.

If used for swimming pools, allow drying completely for 14 days before filling the pool.

Surface Preparation

  • Surfaces to be painted should be free from nibs, cavities, and other imperfections.
  • Mould, oil stains, if any, must be removed.
  • The moisture content of the concrete should be below 14% prior to the application of any coating.
  • Concrete and render should be treated with Coo-Var Acid Etch prior to painting to remove any dirt and laitance and to create a good "key" for the paint.
  • Apply a 10% thinned coat of Teamac Chlorvar to prime and seal the surface prior to applying any coats.
  • Surfaces previously painted with Teamac Chlorvar and that are in good condition can be scrubbed clean and the surface roughened to help adhesion of the new coating.
  • Old perished Chlorvar coatings should be removed mechanically and treated as new substrate and prepared accordingly.

SUITABLE SURFACES: METAL, WOOD, CONCRETE, BRICK, PLASTER
Estimated Coverage : 14 sq. m / L
Drying Time: 2 Hours
Overcoat Time: 16 Hours
Brush wash/Thinners: Chlorvar Thinners 15

Teamac liquid rubber paint white, blue & black provides outstanding protection against chemicals, acids and aqueous solutions on metal, wood and asbestos.

Price Includes VAT

Teamac Chlorinated Rubber Paint

  • A highly water-resistant paint for use in pools, parlours and anywhere water resistance is unimportant
  • The Coo-Var Chlorinated Rubber Swimming Pool Paint has a Gloss finish
  • White Chlorinated Rubber
  • One of the best ways to ensure chemical and water resistance
  • Gives outstanding protection

Available in Blue, Black and white 5 Litre 

SUITABLE SURFACES: METAL, WOOD, CONCRETE, BRICK, PLASTER

Offers outstanding protection against a range of chemicals and aqueous solutions. Can be used in a swimming pool below and above the waterline.

Ideal for swimming pools, paddling pools, fountain pools, ponds etc

  • Ideal for swimming pools
  • Acid-resistant
  • Chemical resistant
  • Salt water-resistant
  • Interior or exterior

One of the reasons why it is such a versatile rubber paint is that it is resistant to saltwater, and a wide range of chemicals and acids. Often used as a gloss finish, Chlorvar Chlorinated Rubber Paint will give protection in moderate to severe corrosive atmospheres.

If used for swimming pools, allow drying completely for 14 days before filling the pool.

Surface Preparation

  • Surfaces to be painted should be free from nibs, cavities, and other imperfections.
  • Mould, oil stains, if any, must be removed.
  • The moisture content of the concrete should be below 14% prior to the application of any coating.
  • Concrete and render should be treated with Coo-Var Acid Etch prior to painting to remove any dirt and laitance and to create a good "key" for the paint.
  • Apply a 10% thinned coat of Teamac Chlorvar to prime and seal the surface prior to applying any coats.
  • Surfaces previously painted with Teamac Chlorvar and that are in good condition can be scrubbed clean and the surface roughened to help adhesion of the new coating.
  • Old perished Chlorvar coatings should be removed mechanically and treated as new substrate and prepared accordingly.

SUITABLE SURFACES: METAL, WOOD, CONCRETE, BRICK, PLASTER
Estimated Coverage : 14 sq. m / L
Drying Time: 2 Hours
Overcoat Time: 16 Hours
Brush wash/Thinners: Chlorvar Thinners 15